SATELLINE-1870 and 1870E user guide
| Frequency range | 868 … 870 MHz |
| Details and limitations for frequencies and power are in the user manual | |
| Channel spacing | 25 kHz fixed |
| Sensitivity/Carrier power | -115 dBm / 0.5 W |
| Interface | RS-232 |
| Data speed | Radio 9600 / RS 19200 bps |
| Operating voltage | +8 … +30 VDC |
| Power consumption | Check the brochure |
| Size/Weight | 125 x 57 x 16 mm / 125 g |
| Connectors | DIN41650-16 pin male / SMA female |
Note: For new systems we recommend other licence free radios from SATEL product portfolio.
The SATELLINE-1870E radio modem provides a wireless transparent data link on the European licence free 868…870 MHz frequency band. It is designed for tight integration into the user’s terminal equipment and is particularly well suited for the transfer of data and control messages in medium range (1-10 km) applications.
Good sensitivity
Small size
Low power consumption
SATELLINE-1870E meets both the technical and economical requirements set on wireless communications in a number of applications, including remote meter reading (gas, electricity, heat), remote control of water distribution, remote control of irrigation systems and environmental monitoring.
Compatible with most user systems and protocols
The SATELLINE-1870E operates in a transparent transfer mode, which ensures compatibility with most user systems and protocols. The settings of the radio modem can be changed from an external terminal in the programming mode or through auxiliary SL-commands during normal operation.
In case there is a need to extend the coverage of the radio modem network, SATELLINE-1870E modems can be used as repeater stations. By using the Store and Forward function, the radio modem buffers the received data and transmits it further using the same radio frequency as in the reception.
The maximum output power of the SATELLINE-1870E is 500 mW, in accordance with the regulations on the use of the 869 MHz band.
Available modem and product code:
SATELLINE-1870E (YM4010)